Бои и Лакови

Showing 1–16 of 21 results

  • SPEKTRO kol Extra

    Rated 0 out of 5

    Usage

    White one-component waterproof powder construction adhesive based on cement, mineral fillers and additives. It is intended for internal and external installation of ceramic and porcelain tiles with mosaic, small and medium dimensions on walls and floors, terraces, porches and balconies, courtyard paths, facades up to the second floor, in rooms subject to moisture and increased load, such as restaurants, canteens, workshops, cellars, etc.

    Preparation

    SPEKTROkol Extra is used at temperatures from +5oC to +35oC. The substrate and the tiles on which it is applied must be flat, solid, clean and moistened with water before applying the adhesive. It is mixed by machine or by hand with water in a ratio of 3:1, it is left to stand for 10 to 20 minutes and then it is mixed well once again and it is ready for use.

    Application

    SPEKTROkol Extra is applied with a steel flat or serrated trowel. Use the prepared mixture within 4 hours. It is recommended to use VRAT PRIMER Grund if the substrate is old/porous plaster or VRAT PRIMER Kontakt if the substrate is concrete. In case the substrate is distinctly uneven and/or damaged, before applying SPEKTROpol Standard it is recommended to fill and level the substrate with SPEKTROkol Basic.

    Consumption

    3-5kg/m2 depending on the type of substrate.

    Packaging

    Natron bag of 25 kg.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC.

    Best before

    12 months from the date printed on the package.

  • SPEKTRO kol Fix

    Rated 0 out of 5

    Usage

    White one-component waterproof powder construction adhesive based on cement, mineral fillers and additives. It is intended, as part of systems for facade or internal thermal insulation, for the installation of thermal insulation plates made of extruded polystyrene (Styrofoam), including hard-pressed Styrodur and Styrofoam enriched with graphite, hard-pressed tervol plates, and for the installation of a plastic reinforcing mesh as substrate for the finishing layer of a facade. The base can be made of bricks, concrete, aerated concrete, plaster, etc.

    Preparation

    SPEKTROkol Fix is used at temperatures from +5oC to +35oC. The substrate and the tiles on which it is applied must be flat, solid, clean and moistened with water before applying the adhesive. It is mixed by machine or by hand with water in a ratio of 3:1, it is left to stand for 10 to 20 minutes and then it is mixed well once again and it is ready for use.

    Application

    SPEKTROkol Fix се нанесува со рамна глетарица во дебелина од 2см на рабовите и попречно на две места во средина, на страната од термоизолациониот елемент која ќе биде во контакт со подлогата. Искористете ја подготвената смеса во рок од 4 часа. На крај подготвениот елемент се фиксира на подлогата и се зацврстува со типли за стиропор. Се препорачува користење на VRAT PRIMER Grund ако подлогата е стар/порозен малтер, или VRAT PRIMER Kontakt ако подлогата е бетон. Во случај да подлогата е изразито нерамна и/или оштетена, пред нанесување на SPEKTROkol Fix се препорачува подлогата да се пополни и израмни со SPEKTROkol Basic. Армирачката мрежа се одмотува и се вградува врз слој од SPEKTROkol Fix, кој е претходно нанесен врз слојот од термоизолациони елементи. Потоа се нанесува уште еден слој од смесата врз мрежата. Вториот слој мора да е израмнет и мазен согласно со карактеристиките и потребите за подлога на завршниот (украсен) слој на фасадата.

    Consumption

    7-10kg/m2 facade, for installing thermal insulation elements and two layers for installing reinforcing mesh.

    Packaging 

    Natron bag of 25 kg.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC.

    Best before

    12 months from the date printed on the package.

  • SPEKTRO kol Flexi

    Rated 0 out of 5

    Usage

    White one-component highly elastic waterproof powder construction adhesive based on cement, mineral fillers and specially selected additives. It is intended for internal and external installation of ceramic and porcelain tiles of large sizes on the wall and floor, shaped natural and composite elements of stone, terracotta and concrete, gluing tile to tile, tiling of bathrooms, open terraces, patio paths, swimming pools, fountains , as well as installing tiles in places where floor heating is installed.

    Preparation

    SPEKTROkol Flexi is used at temperatures of +5оC to +35оC. It is mixed by machine or by hand with water in a ratio of 3:1, it is left to stand for 10 to 20 minutes and then it is mixed well once again and it is ready for use.

    Application

    SPEKTROkol Flexi is applied with a steel flat or serrated trowel. Processing time (open time) is 4 to 6 hours per 20оC. It is recommended to use VRAT PRIMER Grund if the substrate is old/porous plaster or VRAT PRIMER Kontakt if the substrate is concrete. In case the substrate is distinctly uneven and/or damaged, before applying SPEKTROkol Flexi, it is recommended to fill and level the substrate with SPEKTROkol Basic.

    Consumption

    4-5kg/m2 depending on the type of substrate.

    Packaging

    Natron bag of 25 kg.

    Storage

    To be stored in dry rooms in the original packaging at a temperature of +5оC to +35оС.

    Best before 

    12 months from the date printed on the package.

  • SPEKTRO kol Standard

    Rated 0 out of 5

    Usage

    White one-component powder construction adhesive based on cement, mineral fillers and additives. It is intended for internal installation of ceramic tiles on the wall and floor.

    Preparation

    SPEKTROkol Standard is used at temperatures of +5оC to +35оC. The substrate and the tiles on which it is applied must be flat, solid, clean and moistened with water before applying the adhesive. It is mixed by machine or by hand with water in a ratio of 3:1, left to stand for 10 to 20 minutes and then mixed well once again and is ready for use.

    Application

    SPEKTROkol Standard се нанесува со челична рамна или назабена глетарица. Искористете ја подготвената смеса во рок од 4 часа. Се препорачува користење на VRAT PRIMER Grund ако подлогата е стар/порозен малтер или VRAT PRIMER Kontakt ако подлогата е бетон. Во случај да подлогата е изразито нерамна и/или оштетена, пред нанесување на SPEKTROkol Standard се препорачува подлогата да се пополни и израмни со SPEKTROkol Basic.

    Consumption

    4-5кг/м2 зависно од видот на подлогата.

    Packaging

    Natron bag of 25 kg.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC.

    Best before

    12 months from the date printed on the package.

  • SPEKTROglet N

    Rated 0 out of 5

    Usage

    Mixture for smoothing and final leveling of facades and surfaces, subject to atmospheric influences.

    Preparation

    SPEKTROglet N is used at temperatures of +5оC to +35оC. The surface on which it is applied must be flat, solid and free of dust and grease. It is mixed mechanically or manually with water in a ratio of 3:1. It is left to stand for 10 to 20 minutes, it is stirred again and it is ready for use.

    Application

    SPEKTROglet N is applied with a steel or plastic trowel. Use the mixture within 2 to 4 hours. It is recommended to apply VRAT PRIMER Tiff, if the substrate is an old facade or plaster, or VRAT PRIMER Kontakt, if the substrate is concrete. In case the substrate is clearly uneven and/or damaged, before applying SPEKTROglet N it is recommended to fill and level the substrate with SPECTROkol Basic

    .

    Consumption

    2,0 – 3,0 kg/m2 for two layers depending on the characteristics of the substrate.

    Packaging

    Natron bag of 25 kg.

    Storage

    To be stored in dry rooms in the original packaging at a temperature of +5оC to +35оС.

    Best before

    12 months from the date printed on the package.

  • SPEKTROglet V

    Rated 0 out of 5

    Usage

    Mixture for smoothing and final leveling of internal surfaces.

    Preparation

    SPEKTROglet V is used at temperatures of +5оC to +35оC. The surface on which it is applied must be flat, solid and free of dust and grease. It is mixed mechanically or manually with water in a ratio of 3:1 and is ready for use.

    Application

    SPEKTROglet V is applied with a steel or plastic trowel. Use the mixture within a maximum of 2 hours. It is recommended to apply VRAT PRIMER Tiff, if the substrate is plaster or plasterboard, or VRAT PRIMER Kontakt, if the substrate is concrete. In case the substrate is distinctly uneven and/or damaged, before applying SPEKTROglet V it is recommended to fill and level the substrate with SPECTROkol Basic.

    Consumption

    1,5 – 2,5 kg/m2 for two layers depending on the characteristics of the substrate.

    Packaging

    Natron bag of 25 kg.

    Storage

    To be stored in dry rooms in the original packaging at a temperature of +5оC to +35оС.

    Best before 

    12 months from the date printed on the package.

  • SPEKTROkol Basic

    Rated 0 out of 5

    Usage

    One-component powder construction adhesive based on cement, mineral fillers and additives, intended for filling and levelling substrates before their covering or decoration with construction products.

    Preparation

    SPEKTROkol Basic is used at temperatures of +5оC to +35оC. It is mixed by machine or by hand with water in a ratio of 3:1, it is left to stand for 10 to 20 minutes and then it is mixed well once again and it is ready for use.

    Application

    SPEKTROkol Basic can be applied in layers from 3mm to 3cm, depending on the unevenness and damage of the substrate. Processing time (open time) is 4 to 6 hours per 20оС.

    Consumption

    Depending on the unevenness and damage to the floors.

    Packaging

    Natron bag of 25 kg.

    Storage

    To be stored in dry rooms in the original packaging at a temperature of +5оC to +35оС.

    Best before

    12 months from the date printed on the package.

  • SPEKTROkol Blok

    Rated 0 out of 5

    Примена:

    White one-component waterproof powder construction adhesive based on cement, mineral fillers and additives. It is intended for masonry and levelling of aerated concrete and other autoclaved concrete elements (Ciporex, Xella, Itong, Silkapor, etc.), as well as for gluing plasterboard boards and other light building thermal materials on the wall, floor and ceiling.

    Preparation

    SPEKTROkol Blok is used at temperatures of +5оC to +35оC. The substrate and the elements to which it is applied must be flat, solid, and clean before applying the adhesive. It is mixed by machine or by hand with water in a ratio of 3:1, it is left to stand for 10 to 20 minutes and then it is mixed well once again and it is ready for use.

    Application

    SPEKTROkol Blok is applied with a flat or toothed trowel for installing plasterboard and other lightweight thermal materials on walls, floors and ceilings. It is recommended to use VRAT PRIMER Grund if the substrate is old/porous plaster or VRAT PRIMER Kontakt if the substrate is concrete. In case the substrate is distinctly uneven and/or damaged, before applying SPEKTROkol Blok, it is recommended to fill and level the substrate with SPEKTROkol Basic. For masonry of gas-concrete bricks, it is recommended to use a toothed shovel for effective use of the prepared mixture. Then the joints between the elements are filled and leveled (grouted) with a trowel or trowel. The prepared mixture can be used within 2 to 4 hours on the 20оС.

    Consumption

    2-3kg/m2 depending on the type of substrate.

    Packaging

    Natron bag of 25 kg.

    Storage

    To be stored in dry rooms in the original packaging at a temperature of +5оC to +35оС.

    Best before

    12 months from the date printed on the package.

  • SPEKTROpol Extra

    Rated 0 out of 5

    Usage

    SPEKTROpol Extra is an acrylic water-semi-disperse paint, composed of selected additives and fillers, intended for painting and decorating wall and ceiling interior surfaces.

    Preparation

    For economical use, SPEKTROpol Extra can be freely diluted with water up to 10% of the package amount and mixed. For installation of larger areas, when two or more packages are required, it is recommended that all packages be mixed in a larger container to obtain homogeneity.

    Application

    It is applied with a brush or roller. Wait 2-3 hours to apply a second coat. The substrate must first be hard, dry and free of dust and/or loose material. It is recommended that the substrate is pre-treated with VRAT PRIMER Tiff in case it is porous or of old construction.

    Consumption

    With 1 liter of SPEKTROpol Extra you can cover 5-6m2 wall and/or ceiling surface.

    Packaging

    Plastic bucket of 15, 6 and 3.5 liters.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC. Packages with partially used product can be resealed for later use, but not later than the expiration date.

    Best before

    12 months from the date printed on the package.

  • SPEKTROpol Fas

    Rated 0 out of 5

    SPEKTROpol Fas is a white ecologically dispersed paint for external facade painting and decoration, resistant to dry rubbing. It is made on the basis of special aqueous dispersions of acrylate, calcite, fillers and additives.

    Preparation

    For final treatment of facades, the surface should be dry, pre-impregnated with VRAT PRIMER Tiff. It is applied in two layers, diluted with water 10-15% as needed. The second application can be after 4-6 hours.

    working conditions – working temperature 5-35oС.

    Storage

    To be stored in dry rooms in the original packaging at a temperature of +5 to +35oС

    Consumption

    For one application 0.2 - 0.25 kg/m2

    Expiration Date

    12 months, properly stored, keep from freezing.

  • SPEKTROpol Standard

    Rated 0 out of 5

    Usage

    Water semi-dispersion based acrylic paint, composed of selected additives and fillers, intended for painting over and decorating of indoor wall and ceiling surfaces.

    Preparation

    За економично искористување SPEKTROpol Standard може слободно да

    Application

    It is applied with a brush or roller. Wait 2-3 hours to apply a second coat. The substrate must first be hard, dry and free of dust and/or loose material. It is recommended that the substrate is pre-treated with VRAT PRIMER Tiff in case it is porous or of old construction.

    Consumption

    With 1 liter of SPEKTROpol Standard you can cover 5-6m2 wall and/or ceiling surface.

    Packaging

    Plastic bucket of 15, 6 and 3.5 liters.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC. Packages with partially used product can be resealed for later use, but not later than the expiration date.

    Best before

    12 months from the date printed on the package.

  • VRAT ELASTIC Hidroblock

    Rated 0 out of 5

    Usage

    Two-component waterproofing plaster on a cement base, with selected mineral fillers, improving additives and special polymers. It is used for the waterproofing of concrete surfaces (substrates) which are expected to be in constant contact with and subject to great impacts and pressure from water. It is used as waterproofing of swimming pools, fountains, atmospheric drainage, balconies, open terraces and porches, bathrooms, permanently wet surfaces, etc.

    Preparation

    VRAT ELASTIC Hidroblock is used at temperatures of +5оC to +35оC. Before application, the substrate should be clean, degreased and dust-free. Surfaces with a high degree of water absorption should be pre-moistened before application.

    Component B is poured into a clean container and then component A is added. When adding component A, the mixture is constantly mixed with a mixer. Mix for 3 to 5 minutes with the mixer at a low speed so as not to inject too much air into the mixture. The mixing ratio of component A with B should be 2.5:1.

    Application

    VRAT ELASTIC Hidroblock is applied with a trowel, roller or sprayer. With two applied layers, a thickness of at least 2mm will be obtained. The mixture should be used within 60 minutes after it is prepared. After applying the mixture, wait 5 days for it to mature so that it is ready for the installation of tiles or other types of building material.

    Consumption

    2 kg/m2 in two layers.

    Packaging

    Component A: Natron bag of 20 kg.

  • VRAT MINERAL Full

    Rated 0 out of 5

    Примена:

    VRAT MINERAL FULL is a white structural, decorative, mineral plaster for processing internal and external surfaces.

    Preparation

    VRAT MINERAL "N" FULL is put in 8 liters of clean water, mixed with a mixer for 10 minutes. Stir once more before use.

    Application

    It is applied with a trowel and with a brush, it is brought to the required structure. It is applied on top of the basic mechanical plaster "VRATMAL 10", but it is also easily applied on all types of substrates (thermal insulation, continuous plasters, styropore and mineral wool boards).

    It is used at a temperature of +5ºС to +35ºС.

    Do not mix with other materials.

    Best before

    To be stored in a dry place. Duration is 12 months.

    Consumption

    2 21.5 mm2.5 kg/m 2.5 mm3.8 kg/m 2

  • Vrat PRIMER Grund

    Rated 0 out of 5

    Usage

    VRAT PRIMER Primer is an acrylic substrate, intended for impregnation and hardening of all types of plasters, construction adhesives and other construction products with similar properties. It is most often used to strengthen and improve the stability of an embedded base plaster or construction adhesive before applying a new layer of base or decorative plaster, preventing water absorption and rapid drying of the new layer.

    Preparation

    For economic use, VRAT PRIMER Primer can be freely diluted with water up to 10% of the package amount and mixed before installation.

    Application

    It is applied with a brush or roller. The substrate must first be hard, dry and free of dust and/or loose material.

    Consumption

    For impregnation of 1 m2 surface consumption is from 0.25 to 0.35 kg.

    Packaging

    Plastic bucket of 15 and 8 liters.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC. Packages with partially used product can be resealed for later use, but not later than the expiration date.

    Best before

    12 months from the date printed on the package.

  • VRAT PRIMER Kontakt

    Rated 0 out of 5

    Usage

    Bonding layer on a dispersed basis and special fillers and additives, intended to increase the active surface for contact of concrete substrates with the next applied layer of building materials. It is mostly used for coating flat internal and external concrete surfaces before applying plaster or other building materials with similar characteristics.

    Preparation

    VRAT PRIMER KONTAKT is used at temperatures of +5оC to +35оC. It is diluted with 10% water and is ready to use.

    Application

    VRAT PRIMER KONTAKT is applied by brush or roller. Drying time before applying construction products on the layer is 24 hours. In case the substrate is distinctly uneven and/or damaged, before applying VRAT PRIMER Kontakt, it is recommended to fill and level the substrate with SPEKTROcol Basic.

    Consumption

    0,25-0,35 litra/m2 зависно од впивливоста на подлогата.

    Packaging

    Plastic bucket of 25 kg.

    Storage

    To be stored in dry rooms in the original packaging at a temperature of +5оC to +35оС.

    Best before 

    12 months from the date printed on the package.

  • VRAT PRIMER Tiff

    Rated 0 out of 5

    Usage

    VRAT PRIMER Tiff is an acrylic substrate, intended for impregnation and hardening of wall and ceiling surfaces before applying water-dispersed paints. It is most often used to strengthen and improve the stability of embedded base plaster, construction adhesive, plaster, and other surfaces with similar characteristics, while it does not allow water absorption, and also does not allow rapid drying of dispersed paints that should be applied as finished decorative layer. VRAT PRIMER Tiff is especially recommended to be applied to old painted wall and ceiling surfaces before applying fresh water-dispersed paint, which will avoid sinking, peeling, tearing, and other damage to the surfaces, due to the increased water absorption of the old layers.

    Preparation

    It is diluted with water in a ratio of 1:8, whereby a diluted mixture of 40 liters is obtained from a package of 5 liters.

    Application

    It is applied with a brush or roller. The surfaces should be previously hardened, dry and cleaned of dust and/or loose material. For surfaces with higher water absorption, it is recommended to apply a second layer of the diluted mixture.

    Consumption

    It is applied with a brush or roller. The surfaces should be previously hardened, dry and cleaned of dust and/or loose material. For surfaces with higher water absorption, it is recommended to apply a second layer of the diluted mixture.

    Packaging

    Plastic tube of 5 liters.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC. Packages with partially used product can be resealed for later use, but not later than the expiration date.

    Best before

    12 months from the date printed on the package.

en_GBEN