Construction adhesives

Showing all 6 results

  • SPEKTRO kol Extra

    Rated 0 out of 5

    Usage

    White one-component waterproof powder construction adhesive based on cement, mineral fillers and additives. It is intended for internal and external installation of ceramic and porcelain tiles with mosaic, small and medium dimensions on walls and floors, terraces, porches and balconies, courtyard paths, facades up to the second floor, in rooms subject to moisture and increased load, such as restaurants, canteens, workshops, cellars, etc.

    Preparation

    SPEKTROkol Extra is used at temperatures from +5oC to +35oC. The substrate and the tiles on which it is applied must be flat, solid, clean and moistened with water before applying the adhesive. It is mixed by machine or by hand with water in a ratio of 3:1, it is left to stand for 10 to 20 minutes and then it is mixed well once again and it is ready for use.

    Application

    SPEKTROkol Extra is applied with a steel flat or serrated trowel. Use the prepared mixture within 4 hours. It is recommended to use VRAT PRIMER Grund if the substrate is old/porous plaster or VRAT PRIMER Kontakt if the substrate is concrete. In case the substrate is distinctly uneven and/or damaged, before applying SPEKTROpol Standard it is recommended to fill and level the substrate with SPEKTROkol Basic.

    Consumption

    3-5kg/m2 depending on the type of substrate.

    Packaging

    Natron bag of 25 kg.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC.

    Best before

    12 months from the date printed on the package.

  • SPEKTRO kol Fix

    Rated 0 out of 5

    Usage

    White one-component waterproof powder construction adhesive based on cement, mineral fillers and additives. It is intended, as part of systems for facade or internal thermal insulation, for the installation of thermal insulation plates made of extruded polystyrene (Styrofoam), including hard-pressed Styrodur and Styrofoam enriched with graphite, hard-pressed tervol plates, and for the installation of a plastic reinforcing mesh as substrate for the finishing layer of a facade. The base can be made of bricks, concrete, aerated concrete, plaster, etc.

    Preparation

    SPEKTROkol Fix is used at temperatures from +5oC to +35oC. The substrate and the tiles on which it is applied must be flat, solid, clean and moistened with water before applying the adhesive. It is mixed by machine or by hand with water in a ratio of 3:1, it is left to stand for 10 to 20 minutes and then it is mixed well once again and it is ready for use.

    Application

    SPEKTROkol Fix се нанесува со рамна глетарица во дебелина од 2см на рабовите и попречно на две места во средина, на страната од термоизолациониот елемент која ќе биде во контакт со подлогата. Искористете ја подготвената смеса во рок од 4 часа. На крај подготвениот елемент се фиксира на подлогата и се зацврстува со типли за стиропор. Се препорачува користење на VRAT PRIMER Grund ако подлогата е стар/порозен малтер, или VRAT PRIMER Kontakt ако подлогата е бетон. Во случај да подлогата е изразито нерамна и/или оштетена, пред нанесување на SPEKTROkol Fix се препорачува подлогата да се пополни и израмни со SPEKTROkol Basic. Армирачката мрежа се одмотува и се вградува врз слој од SPEKTROkol Fix, кој е претходно нанесен врз слојот од термоизолациони елементи. Потоа се нанесува уште еден слој од смесата врз мрежата. Вториот слој мора да е израмнет и мазен согласно со карактеристиките и потребите за подлога на завршниот (украсен) слој на фасадата.

    Consumption

    7-10kg/m2 facade, for installing thermal insulation elements and two layers for installing reinforcing mesh.

    Packaging 

    Natron bag of 25 kg.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC.

    Best before

    12 months from the date printed on the package.

  • SPEKTRO kol Flexi

    Rated 0 out of 5

    Usage

    White one-component highly elastic waterproof powder construction adhesive based on cement, mineral fillers and specially selected additives. It is intended for internal and external installation of ceramic and porcelain tiles of large sizes on the wall and floor, shaped natural and composite elements of stone, terracotta and concrete, gluing tile to tile, tiling of bathrooms, open terraces, patio paths, swimming pools, fountains , as well as installing tiles in places where floor heating is installed.

    Preparation

    SPEKTROkol Flexi is used at temperatures of +5оC to +35оC. It is mixed by machine or by hand with water in a ratio of 3:1, it is left to stand for 10 to 20 minutes and then it is mixed well once again and it is ready for use.

    Application

    SPEKTROkol Flexi is applied with a steel flat or serrated trowel. Processing time (open time) is 4 to 6 hours per 20оC. It is recommended to use VRAT PRIMER Grund if the substrate is old/porous plaster or VRAT PRIMER Kontakt if the substrate is concrete. In case the substrate is distinctly uneven and/or damaged, before applying SPEKTROkol Flexi, it is recommended to fill and level the substrate with SPEKTROkol Basic.

    Consumption

    4-5kg/m2 depending on the type of substrate.

    Packaging

    Natron bag of 25 kg.

    Storage

    To be stored in dry rooms in the original packaging at a temperature of +5оC to +35оС.

    Best before 

    12 months from the date printed on the package.

  • SPEKTRO kol Standard

    Rated 0 out of 5

    Usage

    White one-component powder construction adhesive based on cement, mineral fillers and additives. It is intended for internal installation of ceramic tiles on the wall and floor.

    Preparation

    SPEKTROkol Standard is used at temperatures of +5оC to +35оC. The substrate and the tiles on which it is applied must be flat, solid, clean and moistened with water before applying the adhesive. It is mixed by machine or by hand with water in a ratio of 3:1, left to stand for 10 to 20 minutes and then mixed well once again and is ready for use.

    Application

    SPEKTROkol Standard се нанесува со челична рамна или назабена глетарица. Искористете ја подготвената смеса во рок од 4 часа. Се препорачува користење на VRAT PRIMER Grund ако подлогата е стар/порозен малтер или VRAT PRIMER Kontakt ако подлогата е бетон. Во случај да подлогата е изразито нерамна и/или оштетена, пред нанесување на SPEKTROkol Standard се препорачува подлогата да се пополни и израмни со SPEKTROkol Basic.

    Consumption

    4-5кг/м2 зависно од видот на подлогата.

    Packaging

    Natron bag of 25 kg.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC.

    Best before

    12 months from the date printed on the package.

  • SPEKTROkol Basic

    Rated 0 out of 5

    Usage

    One-component powder construction adhesive based on cement, mineral fillers and additives, intended for filling and levelling substrates before their covering or decoration with construction products.

    Preparation

    SPEKTROkol Basic is used at temperatures of +5оC to +35оC. It is mixed by machine or by hand with water in a ratio of 3:1, it is left to stand for 10 to 20 minutes and then it is mixed well once again and it is ready for use.

    Application

    SPEKTROkol Basic can be applied in layers from 3mm to 3cm, depending on the unevenness and damage of the substrate. Processing time (open time) is 4 to 6 hours per 20оС.

    Consumption

    Depending on the unevenness and damage to the floors.

    Packaging

    Natron bag of 25 kg.

    Storage

    To be stored in dry rooms in the original packaging at a temperature of +5оC to +35оС.

    Best before

    12 months from the date printed on the package.

  • SPEKTROkol Blok

    Rated 0 out of 5

    Примена:

    White one-component waterproof powder construction adhesive based on cement, mineral fillers and additives. It is intended for masonry and levelling of aerated concrete and other autoclaved concrete elements (Ciporex, Xella, Itong, Silkapor, etc.), as well as for gluing plasterboard boards and other light building thermal materials on the wall, floor and ceiling.

    Preparation

    SPEKTROkol Blok is used at temperatures of +5оC to +35оC. The substrate and the elements to which it is applied must be flat, solid, and clean before applying the adhesive. It is mixed by machine or by hand with water in a ratio of 3:1, it is left to stand for 10 to 20 minutes and then it is mixed well once again and it is ready for use.

    Application

    SPEKTROkol Blok is applied with a flat or toothed trowel for installing plasterboard and other lightweight thermal materials on walls, floors and ceilings. It is recommended to use VRAT PRIMER Grund if the substrate is old/porous plaster or VRAT PRIMER Kontakt if the substrate is concrete. In case the substrate is distinctly uneven and/or damaged, before applying SPEKTROkol Blok, it is recommended to fill and level the substrate with SPEKTROkol Basic. For masonry of gas-concrete bricks, it is recommended to use a toothed shovel for effective use of the prepared mixture. Then the joints between the elements are filled and leveled (grouted) with a trowel or trowel. The prepared mixture can be used within 2 to 4 hours on the 20оС.

    Consumption

    2-3kg/m2 depending on the type of substrate.

    Packaging

    Natron bag of 25 kg.

    Storage

    To be stored in dry rooms in the original packaging at a temperature of +5оC to +35оС.

    Best before

    12 months from the date printed on the package.

en_GBEN