Decorative mortars

Showing all 4 results

  • VRAT MINERAL Full

    VRAT MINERAL Full

    Примена:

    VRAT MINERAL FULL is a white structural, decorative, mineral plaster for processing internal and external surfaces.

    Preparation

    VRAT MINERAL "N" FULL is put in 8 liters of clean water, mixed with a mixer for 10 minutes. Stir once more before use.

    Application

    It is applied with a trowel and with a brush, it is brought to the required structure. It is applied on top of the basic mechanical plaster "VRATMAL 10", but it is also easily applied on all types of substrates (thermal insulation, continuous plasters, styropore and mineral wool boards).

    It is used at a temperature of +5ºС to +35ºС.

    Do not mix with other materials.

    Best before

    To be stored in a dry place. Duration is 12 months.

    Consumption

    2 21.5 mm2.5 kg/m 2.5 mm3.8 kg/m 2

  • VRATMINERAL Rubbing

    VRATMINERAL Rubbing

    Примена:

    VRAT MINERALL RUBBING is a white structural, decorative, mineral plaster for processing external and internal surfaces.

    Preparation

    VRAT MINERALL RUBBING is placed in 8 liters of clean water, mixed with a mixer for 10 minutes. Stir once more before use.

    Application

    It is applied with a trowel and with a brush, it is brought to the required structure.

    It is applied on top of the basic mechanical plaster "VRATMAL 10", but it is also easily applied on all types of substrates (thermal insulation, continuous plasters, styropore and mineral wool boards). It is used at a temperature of +5ºС to +35ºС.

    Do not mix with other materials. To be stored in a dry place.

    Best before

    Duration is 12 months.

    Consumption:

    2 21.5 mm2.5 kg/m 2.5 mm3.8 kg/m 2 22.0 mm3.2 kg/m 3.0 mm4.5 kg/m

  • VRATPLAST Full

    VRATPLAST Full

    Usage

    VRATPLAST Full is a white one-component acrylic decorative plaster (abrib). It is intended for decorating internal (wall and ceiling) and external (facade) surfaces as a finishing layer. It is resistant to atmospheric influences and UV radiation, and is characterized by high strength and evenness of the structure. The offer contains two types; Rubbing, which is performed as a leveled plaster, and Full, which is performed as a full (flat) plaster. Each type can be obtained in three different grain and pattern sizes (1.0mm, 1.5mm and 2.0mm), depending on the customer's taste and needs. VRATPLAST Full can be applied as a finishing layer on all types of basic construction surfaces that are used as primary and secondary layers for the performance of facades and interior rooms, including basic plasters, construction adhesives for leveling nets and thermal insulation facades, and other similar construction products.

    Preparation

    VRATPLAST Full is used at temperatures from +5oC to +35oC. Mix the contents of the package before application. For processing larger areas, it is recommended to mix two or more packages in a larger container to obtain homogeneity.

    Application

    VRATPLAST Full is applied with a flat plastic trowel and is smooth with circular or straight strokes. It is recommended to use VRAT PRIMER Primer if the substrate is an old/porous base plaster and/or similar material. In the event that the substrate is a basic plaster that is distinctly uneven and/or damaged, before applying VRAT PLAST, it is recommended to fill and level the substrate with SPECTROCOL Basic and to strengthen it with VRAT PRIMER Grund.

    Consumption

    According to granulation:
    2.0mm = 4kg/m2
    1.5mm = 3kg/m2
    1.0mm = 2kg/m2
    Consumption may be higher or lower depending on losses that occur during preparation and installation.

    Packaging

    Plastic bucket of 25 kg.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC. Packages with partially used product can be resealed for later use, but not later than the expiration date.

    Best before

    12 months from the date printed on the package.

  • VRATPLAST Rubbing

    VRATPLAST Rubbing

    Usage

    VRATPLAST Rubbing is a white one-component acrylic decorative plaster (abrib). It is intended for decorating internal (wall and ceiling) and external (facade) surfaces as a finishing layer. It is resistant to atmospheric influences and UV radiation, and is characterized by high strength and evenness of the structure. The offer contains two types; Rubbing, which is performed as a leveled plaster, and Full, which is performed as a full (flat) plaster. Each type can be obtained in three different grain and pattern sizes (1.0mm, 1.5mm and 2.0mm), depending on the customer's taste and needs. VRATPLAST Rubbing can be applied as a finishing layer on all types of basic construction surfaces that are used as primary and secondary layers for the performance of facades and interior rooms, including basic plasters, construction adhesives for leveling nets and thermal insulation facades, and other similar construction products.

    Preparation

    VRATPLAST Rubbing is used at temperatures from +5oC to +35oC. Mix the contents of the package before application. For processing larger areas, it is recommended to mix two or more packages in a larger container to obtain homogeneity.

    Application

    VRATPLAST Rubbing is applied with a flat plastic trowel and smoothed with circular or straight strokes. It is recommended to use VRAT PRIMER Primer if the substrate is an old/porous base plaster and/or similar material. In the event that the substrate is a basic plaster that is distinctly uneven and/or damaged, before applying VRAT PLAST, it is recommended to fill and level the substrate with SPECTROCOL Basic and to strengthen it with VRAT PRIMER Grund.

    Consumption

    According to granulation:
    2.0mm = 4kg/m2
    1.5mm = 3kg/m2
    1.0mm = 2kg/m2
    Consumption may be higher or lower depending on losses that occur during preparation and installation.

    Packaging

    Plastic bucket of 25 kg.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC. Packages with partially used product can be resealed for later use, but not later than the expiration date.

    Best before

    12 months from the date printed on the package.