Бои и Лакови

Showing 17–21 of 21 results

  • VRATMAL 10

    VRATMAL 10

    Usage

    Basic ready-made mortar based on cement, mineral fillers and additives. It is intended for mechanical or manual laying of internal (wall and ceiling) and external (facade) building surfaces as a base layer. VRATMAL 10 can be applied to building surfaces, from ordinary and clinker brick, concrete block, gas concrete elements, concrete panels and pillars, and other similar building surfaces. It is resistant to cracking and peeling, making it suitable as a base for applying all kinds of secondary and finishing (decorative) layers of building materials.

    Preparation and Application

    VRATMAL 10 is used at temperatures of +5oC to +35oC. It is mixed by machine or by hand with water in a ratio of 3:1 and is ready for application. During mechanical application, the water consumption will be adjusted using a plastering machine, depending on the density and consistency of the mixture that is prepared and poured by the plastering machine. The mixture should stick to the building surface when it is poured. A metal or plastic trowel is used for manual application. If it is necessary to level and fill unevenness or holes in construction surfaces that are deeper than 3cm, it is recommended to fill the unevenness with two or more layers of VRATMAL 10 to avoid cracking. Wait for the applied layer to dry before applying the next one. We recommend the thinnest layer of 1cm and the thickest layer of 3cm.

    Consumption

    10-30kg/m2 depending on the type of construction surface.

    Packaging

    Natron bag of 25 kg.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC.

    Best before

    12 months from the date printed on the package.

  • VRATMAL 30

    VRATMAL 30

    Usage

    White improved fine mortar based on cement, fillers and selected additives, intended for mechanical and manual covering of internal (wall and ceiling) and external (facade) building surfaces as a base and finishing layer. VRATMAL 30 can be applied to construction surfaces of ordinary and clinker brick, concrete block, gas concrete elements, concrete panels and columns, old plaster and other similar construction surfaces. It is resistant to cracking and peeling, making it suitable as a base for applying all kinds of secondary and finishing (decorative) layers of building materials. Due to the fine granulation and the appearance of an old wall, which is obtained after it has been installed, VRATMAL 30 can be left as a finishing coat or a penultimate coat when applying dispersion paints, depending on the taste of the end user. Due to the use of reinforced additives compared to VRATMAL 10, VRATMAL 30 is considered in the semi-abrasive category and is eligible for reparation of old building surfaces.

    Preparation and Application

    VRATMAL 30 is used at temperatures of +5oC to +35oC. It is mixed by machine or by hand with water in a ratio of 3:1 and is ready for application. During mechanical application, the water consumption will be adjusted using the plastering machine, depending on the density and consistency of the mixture that is prepared and ejected from the plastering machine. The mixture should adhere to the building surface when thrown out. A metal or plastic trowel is used for manual application. If it is necessary to level and fill unevenness or holes in construction surfaces that are deeper than 3cm, it is recommended for economy to fill the unevenness with one or more layers of VRATMAL 10 to avoid cracking. Wait for the applied layer to dry before applying the next one. We recommend the thinnest layer of 1cm, and the thickest layer of 3cm.

    Consumption        10-30kg/m2  depending on the type of construction surface.

    Packaging          Natron bag of 25 kg.

    Storage      In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC.

    Best before     12 months from the date printed on the package.

  • VRATMINERAL Rubbing

    VRATMINERAL Rubbing

    Примена:

    VRAT MINERALL RUBBING is a white structural, decorative, mineral plaster for processing external and internal surfaces.

    Preparation

    VRAT MINERALL RUBBING is placed in 8 liters of clean water, mixed with a mixer for 10 minutes. Stir once more before use.

    Application

    It is applied with a trowel and with a brush, it is brought to the required structure.

    It is applied on top of the basic mechanical plaster "VRATMAL 10", but it is also easily applied on all types of substrates (thermal insulation, continuous plasters, styropore and mineral wool boards). It is used at a temperature of +5ºС to +35ºС.

    Do not mix with other materials. To be stored in a dry place.

    Best before

    Duration is 12 months.

    Consumption:

    2 21.5 mm2.5 kg/m 2.5 mm3.8 kg/m 2 22.0 mm3.2 kg/m 3.0 mm4.5 kg/m

  • VRATPLAST Full

    VRATPLAST Full

    Usage

    VRATPLAST Full is a white one-component acrylic decorative plaster (abrib). It is intended for decorating internal (wall and ceiling) and external (facade) surfaces as a finishing layer. It is resistant to atmospheric influences and UV radiation, and is characterized by high strength and evenness of the structure. The offer contains two types; Rubbing, which is performed as a leveled plaster, and Full, which is performed as a full (flat) plaster. Each type can be obtained in three different grain and pattern sizes (1.0mm, 1.5mm and 2.0mm), depending on the customer's taste and needs. VRATPLAST Full can be applied as a finishing layer on all types of basic construction surfaces that are used as primary and secondary layers for the performance of facades and interior rooms, including basic plasters, construction adhesives for leveling nets and thermal insulation facades, and other similar construction products.

    Preparation

    VRATPLAST Full is used at temperatures from +5oC to +35oC. Mix the contents of the package before application. For processing larger areas, it is recommended to mix two or more packages in a larger container to obtain homogeneity.

    Application

    VRATPLAST Full is applied with a flat plastic trowel and is smooth with circular or straight strokes. It is recommended to use VRAT PRIMER Primer if the substrate is an old/porous base plaster and/or similar material. In the event that the substrate is a basic plaster that is distinctly uneven and/or damaged, before applying VRAT PLAST, it is recommended to fill and level the substrate with SPECTROCOL Basic and to strengthen it with VRAT PRIMER Grund.

    Consumption

    According to granulation:
    2.0mm = 4kg/m2
    1.5mm = 3kg/m2
    1.0mm = 2kg/m2
    Consumption may be higher or lower depending on losses that occur during preparation and installation.

    Packaging

    Plastic bucket of 25 kg.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC. Packages with partially used product can be resealed for later use, but not later than the expiration date.

    Best before

    12 months from the date printed on the package.

  • VRATPLAST Rubbing

    VRATPLAST Rubbing

    Usage

    VRATPLAST Rubbing is a white one-component acrylic decorative plaster (abrib). It is intended for decorating internal (wall and ceiling) and external (facade) surfaces as a finishing layer. It is resistant to atmospheric influences and UV radiation, and is characterized by high strength and evenness of the structure. The offer contains two types; Rubbing, which is performed as a leveled plaster, and Full, which is performed as a full (flat) plaster. Each type can be obtained in three different grain and pattern sizes (1.0mm, 1.5mm and 2.0mm), depending on the customer's taste and needs. VRATPLAST Rubbing can be applied as a finishing layer on all types of basic construction surfaces that are used as primary and secondary layers for the performance of facades and interior rooms, including basic plasters, construction adhesives for leveling nets and thermal insulation facades, and other similar construction products.

    Preparation

    VRATPLAST Rubbing is used at temperatures from +5oC to +35oC. Mix the contents of the package before application. For processing larger areas, it is recommended to mix two or more packages in a larger container to obtain homogeneity.

    Application

    VRATPLAST Rubbing is applied with a flat plastic trowel and smoothed with circular or straight strokes. It is recommended to use VRAT PRIMER Primer if the substrate is an old/porous base plaster and/or similar material. In the event that the substrate is a basic plaster that is distinctly uneven and/or damaged, before applying VRAT PLAST, it is recommended to fill and level the substrate with SPECTROCOL Basic and to strengthen it with VRAT PRIMER Grund.

    Consumption

    According to granulation:
    2.0mm = 4kg/m2
    1.5mm = 3kg/m2
    1.0mm = 2kg/m2
    Consumption may be higher or lower depending on losses that occur during preparation and installation.

    Packaging

    Plastic bucket of 25 kg.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC. Packages with partially used product can be resealed for later use, but not later than the expiration date.

    Best before

    12 months from the date printed on the package.