VRAT ELASTIC Hidroblock
Usage
Two-component waterproofing plaster on a cement base, with selected mineral fillers, improving additives and special polymers. It is used for the waterproofing of concrete surfaces (substrates) which are expected to be in constant contact with and subject to great impacts and pressure from water. It is used as waterproofing of swimming pools, fountains, atmospheric drainage, balconies, open terraces and porches, bathrooms, permanently wet surfaces, etc.
Preparation
VRAT ELASTIC Hidroblock is used at temperatures of +5оC to +35оC. Before application, the substrate should be clean, degreased and dust-free. Surfaces with a high degree of water absorption should be pre-moistened before application.
Component B is poured into a clean container and then component A is added. When adding component A, the mixture is constantly mixed with a mixer. Mix for 3 to 5 minutes with the mixer at a low speed so as not to inject too much air into the mixture. The mixing ratio of component A with B should be 2.5:1.
Application
VRAT ELASTIC Hidroblock is applied with a trowel, roller or sprayer. With two applied layers, a thickness of at least 2mm will be obtained. The mixture should be used within 60 minutes after it is prepared. After applying the mixture, wait 5 days for it to mature so that it is ready for the installation of tiles or other types of building material.
Consumption
2 kg/m2 in two layers.
Packaging
Component A: Natron bag of 20 kg.
