Primers

Showing all 3 results

  • Vrat PRIMER Grund

    Vrat PRIMER Grund

    Usage

    VRAT PRIMER Primer is an acrylic substrate, intended for impregnation and hardening of all types of plasters, construction adhesives and other construction products with similar properties. It is most often used to strengthen and improve the stability of an embedded base plaster or construction adhesive before applying a new layer of base or decorative plaster, preventing water absorption and rapid drying of the new layer.

    Preparation

    For economic use, VRAT PRIMER Primer can be freely diluted with water up to 10% of the package amount and mixed before installation.

    Application

    It is applied with a brush or roller. The substrate must first be hard, dry and free of dust and/or loose material.

    Consumption

    For impregnation of 1 m2 surface consumption is from 0.25 to 0.35 kg.

    Packaging

    Plastic bucket of 15 and 8 liters.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC. Packages with partially used product can be resealed for later use, but not later than the expiration date.

    Best before

    12 months from the date printed on the package.

  • VRAT PRIMER Kontakt

    VRAT PRIMER Kontakt

    Usage

    Bonding layer on a dispersed basis and special fillers and additives, intended to increase the active surface for contact of concrete substrates with the next applied layer of building materials. It is mostly used for coating flat internal and external concrete surfaces before applying plaster or other building materials with similar characteristics.

    Preparation

    VRAT PRIMER KONTAKT is used at temperatures of +5оC to +35оC. It is diluted with 10% water and is ready to use.

    Application

    VRAT PRIMER KONTAKT is applied by brush or roller. Drying time before applying construction products on the layer is 24 hours. In case the substrate is distinctly uneven and/or damaged, before applying VRAT PRIMER Kontakt, it is recommended to fill and level the substrate with SPEKTROcol Basic.

    Consumption

    0,25-0,35 litra/m2 зависно од впивливоста на подлогата.

    Packaging

    Plastic bucket of 25 kg.

    Storage

    To be stored in dry rooms in the original packaging at a temperature of +5оC to +35оС.

    Best before 

    12 months from the date printed on the package.

  • VRAT PRIMER Tiff

    VRAT PRIMER Tiff

    Usage

    VRAT PRIMER Tiff is an acrylic substrate, intended for impregnation and hardening of wall and ceiling surfaces before applying water-dispersed paints. It is most often used to strengthen and improve the stability of embedded base plaster, construction adhesive, plaster, and other surfaces with similar characteristics, while it does not allow water absorption, and also does not allow rapid drying of dispersed paints that should be applied as finished decorative layer. VRAT PRIMER Tiff is especially recommended to be applied to old painted wall and ceiling surfaces before applying fresh water-dispersed paint, which will avoid sinking, peeling, tearing, and other damage to the surfaces, due to the increased water absorption of the old layers.

    Preparation

    It is diluted with water in a ratio of 1:8, whereby a diluted mixture of 40 liters is obtained from a package of 5 liters.

    Application

    It is applied with a brush or roller. The surfaces should be previously hardened, dry and cleaned of dust and/or loose material. For surfaces with higher water absorption, it is recommended to apply a second layer of the diluted mixture.

    Consumption

    It is applied with a brush or roller. The surfaces should be previously hardened, dry and cleaned of dust and/or loose material. For surfaces with higher water absorption, it is recommended to apply a second layer of the diluted mixture.

    Packaging

    Plastic tube of 5 liters.

    Storage

    In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC. Packages with partially used product can be resealed for later use, but not later than the expiration date.

    Best before

    12 months from the date printed on the package.