VRAT PRIMER Tiff

Usage

VRAT PRIMER Tiff is an acrylic substrate, intended for impregnation and hardening of wall and ceiling surfaces before applying water-dispersed paints. It is most often used to strengthen and improve the stability of embedded base plaster, construction adhesive, plaster, and other surfaces with similar characteristics, while it does not allow water absorption, and also does not allow rapid drying of dispersed paints that should be applied as finished decorative layer. VRAT PRIMER Tiff is especially recommended to be applied to old painted wall and ceiling surfaces before applying fresh water-dispersed paint, which will avoid sinking, peeling, tearing, and other damage to the surfaces, due to the increased water absorption of the old layers.

Preparation

It is diluted with water in a ratio of 1:8, whereby a diluted mixture of 40 liters is obtained from a package of 5 liters.

Application

It is applied with a brush or roller. The surfaces should be previously hardened, dry and cleaned of dust and/or loose material. For surfaces with higher water absorption, it is recommended to apply a second layer of the diluted mixture.

Consumption

It is applied with a brush or roller. The surfaces should be previously hardened, dry and cleaned of dust and/or loose material. For surfaces with higher water absorption, it is recommended to apply a second layer of the diluted mixture.

Packaging

Plastic tube of 5 liters.

Storage

In dry and ventilated rooms in original packaging at a temperature of +5oC to +35oC. Packages with partially used product can be resealed for later use, but not later than the expiration date.

Best before

12 months from the date printed on the package.

Share